Maintaining your Tommee Tippee Perfect Prep Machine is crucial for ensuring the safe preparation of your baby's formula. This guide provides a comprehensive cleaning and sterilization procedure, ensuring your machine remains hygienic and delivers optimally prepared feeds. Following these simple steps will help extend the life of your machine and maintain the highest standards of cleanliness, contributing to your baby's health and well-being. Regular cleaning and sterilization are essential, even with regular use, to prevent the build-up of bacteria and residue that could compromise the purity of the water used for formula preparation.This detailed, step-by-step guide will walk you through the entire process, from emptying the water tank and dismantling removable parts to sterilizing the machine with a Milton tablet and rinsing with boiling water. We'll also cover the final steps of cleaning the exterior and running a test cycle to confirm everything is functioning correctly. By following these instructions, you can confidently maintain your Tommee Tippee Perfect Prep Machine, guaranteeing safe and reliable formula preparation for your baby.
Pros And Cons
- Works for the user's family
- Controversial
- Can be loud during draining
Read more: Top 5 UV Baby Bottle Sterilizers of 2024
Emptying the Water Tank
Begin by emptying the water tank. This is a crucial first step before cleaning and sterilizing the machine. Locate the water tank and carefully remove any water.
Position a jug underneath the water dispenser. This will help collect the water as it drains.
Press the teardrop-shaped button on the side of the machine to initiate the draining process. You'll notice a light illuminate, indicating that the water is draining.
Cleaning the Removable Parts
Remove the bottle tray, hopper, and lid. These components should be cleaned separately.
Wash all removable parts with warm soapy water. Use regular dish soap; specialized cleaners aren't necessary.
Rinse the parts thoroughly and set them aside to air dry completely before reassembly.
Sterilizing the Machine
Once the removable parts are clean and dry, refill the water tank with fresh water. Fill it completely.
Add one half of a Milton sterilizing tablet to the water. This tablet will sterilize the machine.
Allow the solution to sit for approximately 15 minutes to ensure complete sterilization.
Final Rinse and Reassembly
After 15 minutes, empty the sterilizing solution. Use the same draining process as before.
Fill the tank with a kettle full of freshly boiled water to further clean the machine. This step is crucial for removing any remaining residue.
Empty the boiling water. Repeat this boiling water rinse a second time. Finally, refill the tank with fresh water and reassemble all parts.
Final Cleaning and Test Cycle
Wipe down the exterior of the machine with antibacterial wipes, paying special attention to areas that may accumulate residue.
Run a test cycle to ensure the machine is functioning properly and dispensing water at the correct temperature.
Once the test cycle is complete, your Tommee Tippee Perfect Prep Machine is ready for use.
