The Baby Brezza Bottle Washer Pro simplifies the often-daunting task of cleaning baby bottles and accessories. This comprehensive user guide provides step-by-step instructions for operating the machine, ensuring you get the most out of its efficient cleaning and sterilizing capabilities. From filling the water tanks and loading bottles and accessories correctly, to selecting the appropriate wash cycle and emptying the dirty water tank, we'll cover it all. We'll also explore the various cycle options, including wash-only, wash/sterilize/dry, and separate sterilizing and drying functions, allowing you to customize the cleaning process to your specific needs.This guide will equip you with the knowledge to effectively utilize all the features of your Baby Brezza Bottle Washer Pro. We'll cover troubleshooting tips and address common questions, making the entire process straightforward and convenient. Learn how to maximize the machine's functionality, optimize cleaning results, and keep your baby's feeding equipment hygienically clean. Whether you're a new parent or a seasoned pro, this guide will be your ultimate resource for mastering your Baby Brezza Bottle Washer Pro.
Pros And Cons
- Allows filling the water tank directly at the sink or with a pitcher.
- Washes up to four bottles simultaneously.
- Can accommodate various accessories (vent tubes, pump shields, flanges) on different racks.
- Has separate racks for bottles and smaller accessories.
- Offers wash, sterilize, and dry cycles; wash-only and sterilize-only options.
- Includes a pause function.
- Replacement pump parts rack needs to be purchased separately.
- Only uses Baby Brezza detergent tablets (using other detergents voids warranty).
- Lid may be hot and steam may escape if opened during a cycle.
- Drying cycle is 60 minutes long.
Read more: Prince Lionheart Baby Bottle Drying Rack Review: Is it Worth the Hype?
Filling and Preparing the Washer
Begin by filling the clean water tank. You can either leave the tank on the base and fill it using a pitcher or fill it directly at the sink. Ensure the water level reaches the fill line indicated at the top edge of the clear tank.
Next, confirm that the dirty water tank is empty and properly inserted into the base. Carefully remove the lid by grasping the handle and lifting it straight up. This prepares the washer for loading.
Before loading, give bottles and accessories a quick rinse to remove any large milk or food residue. This will help ensure a thorough cleaning cycle.
Loading the Bottle Washer
Place up to four bottles upside down on the lower rack, making sure they are centered over the spray jets for optimal cleaning.
Vent tubes and other small accessories can be placed over the side jets. Pump shields and flanges should also be placed upside down on the lower rack, centered over a spray jet.
Nipples and smaller accessories should be placed on the top rack. Bottle collars can be positioned beside them. A separate pump parts rack is available for purchase if needed to hold all pump parts, including wearables.
Starting the Wash Cycle
Place one Baby Brezza detergent tablet in the detergent tray. It’s acceptable if the tablet falls into the sump. Using other detergents voids the warranty.
Carefully place the lid on the base, ensuring it's completely closed. Plug in the bottle washer and turn it on by pressing and holding the power button for three seconds.
The washer is preset to wash and dry. You can adjust the cycle by pressing the wash mode button: once for wash, sterilize, and dry; twice for wash only. The complete wash cycle takes approximately 19 minutes.
Cycle Operation and Cleaning
The cycle consists of a 10-minute wash cycle and three 3-minute rinse cycles. Sterilizing adds 9 minutes, and drying takes 60 minutes. You can pause and resume the cycle using the start/pause button. Be cautious when opening the lid during a cycle as it may be hot and release steam.
After each wash cycle, empty the dirty water tank carefully into the sink. Rinse and dry the tank before reinserting it into the machine. To empty the sump, press and hold the wash mode and sterilize/dry buttons for three seconds.
Sterilizing without washing is also possible by pressing the sterilize/dry button accordingly. Options include sterilize and dry, dry only, or sterilize only.
Conclusion
The Baby Brezza Bottle Washer Pro offers a convenient and efficient way to clean and sterilize baby bottles and accessories. Its multiple cycle options cater to various needs, and the clear instructions make it user-friendly. However, using only the recommended detergent is crucial to maintain the warranty. While a dedicated pump parts rack is sold separately, the overall functionality and ease of use make it a worthy investment for busy parents.
Key features include multiple cleaning cycles (wash only, wash/sterilize/dry), a separate sterilizing function, and convenient water tank design. The lengthy drying cycle might be a drawback for some. Overall, the ease of use and efficient cleaning capabilities outweigh this minor inconvenience.